LAN Phone 302

Introduction

LAN Phone 302 is a full-featured IP-based telephone set for home telephony via Ethernet base communication. It supports SIP RFC3261 protocol. Two 10/100BaseT embedded switch/hub RJ-45 ports allow connect to office LAN and PC on your table. It is easily interface with ADSL/Cable Modem that is provided by ITSP, ISP or Carrier company to provide VoIP services to residential and SOHO application.

   Multiple Advantages

  • Built-in two 10/100BaseT Switch

    The internal two-port Ethernet switch allows for a direct connection to a 10/100BaseT Ethernet network via an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC. The system administrator can designate separate virtual LANs (VLANs) (802.1P1Q) for the PC and Welltech IP Phones.
  • Big Key

    Those Keys are big in the phone-set LP-302. It is easy to use for old man and children at home.
  • Big LCD screen

    The LCD of LP-302 shows big characters that easy to reading for old man and children at home.
  • Graphic Memory key

    There are five memory keys in the left side of LP-302 that will show by different graphic pictures. It is very easy to understand and operation by old man and children at home.
  • Easy to installation

    Users can set up the phone-set LP-302 by themselves through easy installation guide and steps of LCD panel.
  • High cost-effective phone-set

Specification  
WAN interface
  • One RJ-45 10/100 BaseT Port
LAN interface
  • One RJ-45 10/100 BaseT Port
Power Adapter
  • 5V DC
LCD Display
  • 2 lines x 13 characters 
Memory Key
  • 5
Function Key
  • 4
Menu control Key
  • 4
Hand free Speaker phone
  • Support echo cancellation
Network Connect
  • Fix IP, DHCP, PPPoE
Link Mode (SIP)
  • Proxy mode and Peer to Peer mode
Protocol
  • SIP (RFC3261)
Audio Codec support
  • G711, G729A, G729AB
QoS Support
  • VLAN (802.1p1q)
Telephony features
  • Mute, Forward, Hold, Redial, Transfer
Configure management
  • LCD Front Panel, Web Browser, Telnet, Welltech's EMS
DTMF (SIP)
  • In-band, RFC 2833 out-band DTMF generation/detection
Certification
  • CE, FCC
Humidity
  • (10 to 95%) non-condensing, operating, and non-operating/storage
Operational Temperature

  • (0 to 40℃)

Storage Temperature
  • (-10 to 60℃)
Dimension
  • 200mm(W) x 79mm(H) x 210mm(D)
Weight
  • 830 g