Introduction
VM
2100 is a full-featured IP-based telephone
set for office telephony via Ethernet base
communication. Over the office LAN connection,
it provides IP-PBX solution such as station-to-station
call, IP call and local PSTN/PBX extension
call via PSTN Gateway. The traditional PBX
functionality is provided with H.450 features
together with Gatekeeper or IP/PBX Call
Manager. Two 10/100BaseT embedded switch/hub
RJ-45 ports allow connect to office LAN
and PC on your table.
It
is easily interface with ADSL/Cable Modem
that is provided by ITSP, ISP or carrier
company to provide VoIP services to residential
and SOHO application. An integrated Analog
Phone features provides IP call or PSTN
call selection. Or to be a Plain Old Telephone
set (POTs) when external power is failure.
It
provides programmable keys and feature buttons,
an internal high-quality speakerphone with
microphone mute, HOLD function, FORWARD
and TRANSFER feature buttons. The LAN Phone
101 also provides a dot matrix of two lines
24 characters LCD display each. The display
provides features such as date and time,
calling party name, calling party number,
and digits dialed. An LED associated with
each feature and line buttons provides feature
and line status.
TELNET
and LCD front panel provide local and remote
configuration, Management and software download.
By using this feature, ITSP/ISP provides
centralized control, management and software
upgraded remotely. Several examples are
listed below: IP/Gatekeeper addressing setting,
dial plan, voice coder, Gatekeeper and Peer
to Peer mode selection, QoS and call progress
tone setting.
Application
ISP/ITSP
(Internet Telephony Service Provider)
Multi-nation enterprise communication
SOHO Telephony
IP-PBX with office telephony services
Phone to PC, Phone to Phone
Benefits
Easy
access to Internet phone call
Cost Saving - Telephone call from VPN or
public Internet
Follows the existing telephone call dial
plan
Easy interface to ADSL/Cable Modem or Leased
line equipment
Built-In two 10/100BaseT Switch/Hub
Built-In analog line telephone function
Provided IP call or PSTN call selection
(Or) to be a Plain old Telephone set when
external power is failure
Features
Support
ITU-T H.323 V2/V3/V4 protocol
PPPoE (option)
Behind NAT router or IP sharing device
Support both Fixed IP and DHCP
Support H.235 security function
Support Fast Start and H.245 Tunneling
Provide H.450 services (Hold, Transfer,
Forward)
Multiple E.164 (line number) supported
Automatically GateKeeper Discovery
Alternate Gatekeeper selection
Provide Peer-to-Peer Mode (Non Gatekeeper
needed) selection
2 x 24 dot matrix LCD display
Speaker phone and Handset operation
Ring tone, Speaker and Handset volume adjustable
10 sets last number redial
LCD Display: Time, Date, Caller ID, Call
Duration
12 Number Keypads: 0 to 9, # and *
4 LCD operation keys : OK, C, LEFT and RIGHT
10 function keys for Memory dial or Multi-Line
function
8 one touch function keys : Speaker, Redial,
Mute, Hold, Transfer, Call Forward, PSTN,
Message
5 LED display : PSTN, Message, Hold, Mute
and Speaker
Enter IP phone and Gatekeeper IP address
from Keypads
Configure Dial path selection
Microsoft NetMeeting (TM) v3.0 compatible
Support QOS by setting TOS (Type Of Service)
parameters of VoIP packet
|
